Workers' Comp Rates for Iron/Steel - Ornamental (Class Code 5059)
Description
Covers workers fabricating and installing ornamental iron and steel including railings, staircases, and decorative metalwork.
Common Businesses
Hazard Group
F
Filed Figures Published
2
states · class percentile 94
Filed Figures for Class Code 5059 in the States That Publish Them
Copied from each state's own regulator or rating bureau filing, per $100 of payroll. A loss cost is what the filing calls it — your insurer multiplies it by its own loss cost multiplier; a rate is a manual rate. States not listed publish no per-class figure this site has transcribed.
Judged only from filed tables, code 5059 has a class percentile of 94 (0 = the cheapest class, 100 = the most expensive) across the 2 filings that list it.
How States Rank for Class Code 5059
Cost index 1.00 = the median of the 47 rated states. It is a relative position from this site’s model, not a price, and it does not vary by class code; a state’s filed figure, where it publishes one, is shown beside it. North Dakota, Ohio, Washington and Wyoming are not included. Each is a monopolistic state fund that sets premium on its own basis rather than on an NCCI class-code rate per $100 of payroll, so there is no comparable figure to average or rank.
| State | Cost index | Filed figure | Filing effective |
|---|---|---|---|
| Indiana | 0.73 | — | 2026-01-01 |
| Texas | 0.74 | — | 2026-07-01 |
| Virginia | 0.78 | — | 2026-04-01 |
| Utah | 0.79 | — | 2026-02-01 |
| Arkansas | 0.82 | — | 2026-07-01 |
| Colorado | 0.83 | — | 2026-01-01 |
| South Dakota | 0.83 | — | 2026-07-01 |
| Arizona | 0.86 | — | 2026-01-01 |
| Nebraska | 0.88 | — | 2026-02-01 |
| North Carolina | 0.88 | — | 2026-04-01 |
| Idaho | 0.89 | — | 2026-01-01 |
| Tennessee | 0.89 | — | 2026-10-01 |
| Kansas | 0.90 | — | 2026-01-01 |
| Mississippi | 0.91 | — | 2026-03-01 |
| New Mexico | 0.92 | — | 2026-01-01 |
| Kentucky | 0.93 | — | 2026-01-01 |
| South Carolina | 0.93 | — | 2026-04-01 |
| Iowa | 0.95 | — | 2026-01-01 |
| Missouri | 0.96 | — | 2026-01-01 |
| Nevada | 0.97 | — | 2026-03-01 |
| Georgia | 0.98 | — | 2026-03-01 |
| Maryland | 0.98 | — | 2026-01-01 |
| Oregon | 0.99 | — | 2026-01-01 |
| West Virginia | 1.00 | — | 2026-01-01 |
| Alabama | 1.01 | — | 2026-03-01 |
| Minnesota | 1.01 | — | 2026-01-01 |
| New Hampshire | 1.01 | — | 2026-01-01 |
| Wisconsin | 1.01 | $10.558 rate | 2026-10-01 |
| Delaware | 1.03 | — | 2025-12-01 |
| Maine | 1.03 | — | 2025-04-01 |
| Rhode Island | 1.04 | — | 2026-08-01 |
| Michigan | 1.05 | — | 2026-01-01 |
| Vermont | 1.05 | — | 2026-04-01 |
| New York | 1.06 | $5.062 loss cost | 2026-10-01 |
| Florida | 1.07 | — | 2026-01-01 |
| Montana | 1.07 | — | 2026-07-01 |
| District of Columbia | 1.10 | — | 2026-01-01 |
| Massachusetts | 1.10 | — | 2024-07-01 |
| Oklahoma | 1.10 | — | 2026-01-01 |
| Illinois | 1.12 | — | 2026-01-01 |
| Connecticut | 1.14 | — | 2026-01-01 |
| Louisiana | 1.17 | — | 2026-05-01 |
| Hawaii | 1.20 | — | 2026-01-01 |
| Pennsylvania | 1.20 | — | 2026-04-01 |
| New Jersey | 1.21 | — | 2026-01-01 |
| Alaska | 1.33 | — | 2026-01-01 |
| California | 1.34 | — | 2026-09-01 |
A filed rate — or a loss cost times your insurer's multiplier — is step 1 of the eight-step rating-bureau premium algorithm. See what your carrier applies after that, or work out premium for code 5059 with your own rate, payroll and experience mod.
Related Class Codes
Frequently Asked Questions
- What is workers' comp class code 5059?
- Class code 5059 (Iron/Steel - Ornamental) is an NCCI workers' compensation classification in the Construction industry group. Covers workers fabricating and installing ornamental iron and steel including railings, staircases, and decorative metalwork. Hazard group: F.
- How much is workers' comp insurance for class code 5059?
- It depends on the state, and only some states publish a per-class figure. For class code 5059, the filed figures per $100 of payroll are: New York $5.062 (loss cost, NYCIRB, effective 2026-10-01); Wisconsin $10.558 (rate, WCRB, effective 2026-10-01). A loss cost is not a rate — your insurer multiplies it by its own loss cost multiplier — and every figure is before your experience modification. For other states this site shows a relative cost index, not a dollar figure. North Dakota, Ohio, Washington and Wyoming are not included. Each is a monopolistic state fund that sets premium on its own basis rather than on an NCCI class-code rate per $100 of payroll, so there is no comparable figure to average or rank.
- What businesses use workers' comp class code 5059?
- Class code 5059 typically applies to Ornamental iron shops, Custom railing fabricators, Decorative metalwork studios, Staircase manufacturers.
Get a Workers' Comp Quote
Compare rates for Iron/Steel - Ornamental from top-rated carriers.
Get Quote